How to Change a Flat Tire

  1. Park car on flat surface, put on emergency brake and hazard lights, set up reflective warning triangle, put block on tire diagonally opposite flat tire, and remove spare tire from car (make sure it’s inflated).
  2. Remove hubcap so you can get to the lug nuts. Loosen nuts with lug wrench. Don’t take any of them off yet — loosen just enough to “crack” them.
  3. Place jack underneath car at a sturdy part of the frame. Check your owner’s manual for correct placement. Turn crank at end of jack by hand until it contacts the frame.
  4. Add jack handle for leverage. Crank handle until wheel is high enough above the ground to remove the tire, Don’t stick your hands or legs under the car — it could fall and injure you.
  5. Remove lug nuts from wheel by turning them counterclockwise, and keep them in your hubcap so they don’t roll away. Remove flat tire and lay flat. You don’t want it to roll away either.
  6. Line up spare tire with wheel studs and place on car. Once wheel is on, replace lug nuts and tighten them by hand, and then with your lug

Comments

Popular posts from this blog

Types Of Car Brokers In Mombasa

TOP 5 CARS THAT THE MIDDLE CLASS IN KENYA SHOULD BUY & DRIVE IN 2023

WHY JAPANESE CARS HAVE THE LOWEST MILEAGE IN THE WORLD